RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0049825 POWER BACK DOOR MAIN SWITCH G

DOOR / HATCH  POWER BACK DOOR MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84965 1.INSPECT POWER BACK DOOR MAIN SWITCH

a.

Check the resistance.

i.
B338152C01
1.271,3.01 1.552,2.698 true 2.26,3.01 2,2.698 true 1.625,1.594 1.938,1.75 0.313,0.156 10 *a 1.094,3.021 1.406,3.219 0.313,0.198 10 UL 2.281,3.021 2.438,3.219 0.156,0.198 10 E
*a Component without harness connected
(Power Back Door Main Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
9 (UL) - 6 (E) Switch off 10 kΩ or higher
Switch on Below 1 Ω


If the result is not as specified, replace the back door main switch.



b.
B338153C01
1.469,3.021 1.677,2.677 true 2.083,3 1.885,2.688 true 1.635,1.563 1.948,1.719 0.313,0.156 10 *a 1.427,3.031 2.042,3.229 0.615,0.198 10 ILL+ 2.094,3.01 2.708,3.208 0.615,0.198 10 ILL-
*a Component without harness connected
(Power Back Door Main Switch)


Inspect the illumination operation.

i.

Apply battery voltage to the power back door main switch connector, and check that the power back door main switch LED illuminates.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 8 (ILL+)
Battery negative (-) → Terminal 7 (ILL-) 		LED illuminates


If the result is not as specified, replace the back door main switch.